LCSF Low Clearance Split Frame Tooling

Genuine Wachs Tooling for FlyOut

Genuine Wachs Tooling for the LCSF Low Clearance Split Frame is compatible with all models from 6in through 48in (DN 150-1200). Genuine Wachs cut and bevel form tools can machine all common pipe materials and most pipe schedules. Single point tooling is used on heavy wall pipe and covers most pipe material and all pipe schedules. Premium Wachs Tooling for high alloy materials is available on select part numbers (denoted by a “P” suffix), with additional numbers available by special order.

Genuine Wachs Tooling is manufactured from premium tool steels utilizing exclusive designs to give you consistent quality cutting, and tested to the highest standards in the industry. The numbers shown are commonly used tooling for most applications. If you have an application for tooling not listed, please contact the factory to speak with a technical sales representative.

 

Beveling and Counterbore Tools
Description Part Number Application Image
HSS Inside Bevel Tool Short bevel tool for most
materials. 30º - 1in (25mm)
and 37.5º - 3/4in (19mm)
maximum wall
43-702-05
30º x 3 1/8in (79mm) 43-702-05
37.5º x 3 1/8in (79mm) 43-703-05
HSS Inside Bevel Tool Long bevel tool for most
materials. 30º - 1in (25mm)
and 37.5º - 3/4in (19mm)
maximum wall
53-703-01
30º x 5in (127mm) 53-703-01
53-703-01P
37.5º x 5in (127mm) 53-703-00
53-703-00P
HSS Outside Bevel Tool Outside bevel tool for most
materials. 30º - 1in (25mm)
and 37.5º - 3/4in (19mm)
maximum wall
43-708-06
30º x 3 1/8in (79mm) 43-707-05
30º x 5in (127mm) 43-707-06
37.5º x 3 1/8in (79mm) 43-708-05
37.5º x 5in (127mm) 43-708-06
HSS Double Bevel Tool Double bevel tool for most
materials. 3/4in (19mm)
maximum wall
43-709-05
30º x 3 1/8in (79mm) 43-709-05
30º x 5in (127mm) 43-709-06
37.5º x 3 1/8in (79mm) 43-710-05
37.5º x 5in (127mm) 43-710-06
HSS Compound Bevel Tool Compound bevel tool for most
materials. 1 1/4in (32mm)
maximum wall for both tools
53-705-00/53-704-00
10º x 37.5º x 4in (102mm) Inside 43-712-01
10º x 37.5º x 4in (102mm) Outside 43-712-02
10º x 37.5º x 5in (127mm) Inside 53-705-00
10º x 30º x 5in (127mm) Inside 53-704-00
4:1 Taper, Counterbore HSS Tool 60-700-04 4:1 Taper, counterbore most materials
Requires 60-405-UC Universal
Counterbore Slide or 60-428-XX
Bridge Slide
60-700-04


Consult with the factory for other bevel tool applications.

Parting Tools
Description Part Number Application Image
3/16in x 3 7/16in (4.76mm x 87mm) HSS Parting Tool (Sever tool) 43-711-00
43-711-00P
Standard parting,
most materials up to
1in (25.4mm) wall
(low clearance)
43-711-00
3/16in x 5in (4.76mm x 127mm) HSS Parting Tool (Sever tool) 43-711-01
43-711-01P
Parting for most materials,
up to 1in (25.4mm) wall
43-711-01
1/4in x 6in (6.35mm x 152mm) HSS Parting Tool (Sever tool) 60-711-00
60-711-00P
Heavy wall parting,
most materials, up to
2in (50.8mm) wall
60-711-00
4.3in (110mm) Carbide Insert Holder for 3/16in (4.76mm) parting insert 60-716-00
SUPERSEDES 43-704-00
Standard parting,
most materials up to
1 1/2in (38.1mm) wall
60-716-00
3/16in (4.76mm) Carbide Insert 60-717-00
SUPERSEDES 43-705-00
For use with 60-716-00
Insert Holder
60-717-00
4.3in (110mm) Carbide Insert Holder for 1/4in (6.35mm) parting insert 60-714-00
SUPERSEDES 47-701-00
Standard parting, most
materials up to
1 1/2in (38.1mm) wall
60-714-00
1/4in (6.35mm) Carbide Insert( 60-715-00
SUPERSEDES 47-702-10
For use with 60-714-00
Insert Holder
60-715-00

 

Single Point Tooling
Description Part Number Application Image
HSS Tool Bit for single point
facing, beveling and flange facing.
Standard 3/8in x 3/8in
(9.53mm x 9.53mm)
For use with LCSF Bridge Slide
52-701-01
52-701-01P
Single point beveling
Most materials less than
32RC hardness
52-701-01
HSS Radius Tool Bit for J-prep 52-711-01 3/32in (2.38mm) radius 52-711-01
52-711-02 1/8in (3.18mm) radius
52-711-03 3/16in (4.76mm) radius
Tool Holder for HSS Tool Bit 60-707-00 Heavy wall pipe
beveling, all materials
60-707-00

Downloads

Datasheet Tooling Sheet