DynaPrep MDSF Tooling

Genuine Wachs Tooling for FlyOut

Based on the industry standard 1in (25.4mm) square size, this tooling is designed to withstand the loads imposed by heavy-wall machining. The DuoEdge system of reusable holders and replaceable insert and patent pending designs offer a low cost per cut, with many featuring dual cutting surfaces. To maintain the DynaPrep MDSF’s peak cutting and beveling performance always be sure to specify Genuine Wachs Tooling®.

Wachs DuoEdge Insert Tooling is a system of portable machine tool holders and inserts designed to replace larger, more expensive traditional single edge tooling. It offers considerable cost savings over traditional tooling without sacrificing the longevity of the cutting edge or the quality of the finished prep.

DuoEdge utilizes reusable tooling holders where the user “inserts” a small, replaceable tool bit that has dual cutting edges. When the first cutting edge is worn away, the insert is rotated 180 degrees to the second cutting edge. When the second cutting edge is worn away, the insert is discarded and a new insert installed.

E.H. Wachs Tooling is manufactured specifically to meet the needs of portable machining. Wachs designs and manufactures our tooling with the profiles and finishes required for either form tooling or single point machining. DuoEdge insert tool bits are ground to a super smooth finish, reducing friction for longer tooling life.

There are multiple advantages to Wachs DuoEdge Insert Tooling system, the primary advantage being cost. It is much less expensive to purchase a tiny tool insert than a large tool bit made from expensive hardened steel. Other advantages include:
• Two cutting edges instead of one, for minimal work interruption
• Each cutting edge costs on average one third the cost of a traditional bit
• No need to resharpen tooling, saving time, labor and shipping
• Small size of inserts makes them easy to store or carry in your pocket
• Holders are reusable, inserts are interchangeable between holders
• End prep holder is reversible to a high and low range position

The DynaPrep MDSF series of split frame cutter/bevelers utilizes the next generation of Wachs DuoEdge tooling.

Insert Tooling & Holders
Description Code Part # Application Image
DuoEdge Insert Tooling Holders
37.5° Inside
Bevel Holder
Coated Steel
969 700 201 69-7002-01 Bevel Cutting
37.5° Outside
Bevel Holder
Coated Steel
969 700 301 69-7003-01
30° Inside
Bevel Holder
Coated Steel
969 700 401 69-7004-01 Bevel Cutting
30° Outside
Bevel Holder
Coated Steel
969 700 501 69-7005-01
Tooling Holders
10-37.5° Inside
Bevel Holder
Coated Steel
969 700 801 69-7008-01 Compound Bevel Cutting
10-37.5° Outside
Bevel Holder
Coated Steel
969 700 901 69-7009-01 Compound Bevel Cutting
DuoEdge Inserts (HSS)
30° & 37.5° Inside
Bevel Insert
969 700 202 69-7002-02 Bevel Cutting
30° & 37.5° Inside
Bevel Inserts
(5 Pack)
969 700 212 69-7002-05
30° & 37.5° Outside
Bevel Insert
969 700 302 69-7003-02 Bevel Cutting
30° & 37.5° Outside
Bevel Inserts
(5 Pack)
969 700 312 69-7003-05
Tooling Inserts (HSS)
10-37.5° Inside
Bevel Insert
969 700 802 69-7008-02 Compound Bevel
10-37.5° Inside
Bevel Inserts
(5 Pack)
969 700 812 69-7008-05
10-37.5° Outside
Bevel Insert
969 700 902 69-7009-02 Compound Bevel
10-37.5° Outside
Bevel Inserts
(5 Pack)
969 700 912 69-7009-05
DuoEdge Counterbore Insert Tooling Holders
Coated Steel
DuoEdge Form Tool 4:1 Tooling Holder 969 700 700 69-7007-00 Counterbore
DuoEdge Single Point
Tooling Holder
969 700 701 69-7007-01 Counterbore
Flange Facing Single Point
Tooling Holder
969 700 703 69-7007-03 Flange Facing
DuoEdge Single Point
Tooling Holder
960-718-000 60-718-00 Single Point Bevel
DuoEdge Single Point Inserts
DuoEdge Single Point
HSS Tooling Insert
981 701 010 81-701-01 Carbon steel
DuoEdge Single Point
HSS Tooling Insert
10-Pack
981 701 100 81-701-10
DuoEdge Single Point
HSS Premium Tooling Insert
981 701 009 81-701-00P Stainless steel
DuoEdge Single Point
HSS Premium Tooling Insert 10-Pack
981 701 109 81-701-10P
DuoEdge Single Point Carbide Tooling Insert 981 703 010 81-703-01 High-temp alloys
DuoEdge Single Point
Carbide Tooling Insert
10-Pack
981 703 100 81-703-10
HSS Triple Point
for 69-7007-03 single point holder
956 710 000 56-710-00 Flange Facing

 

 

J-Prep Bevel Tooling
Description Code Part # Application Image
DuoEdge™ J-Prep Insert
High Speed Steel (HSS)
981 704 010 81-704-01 3/32in radius
(2.39mm)
981 705 010 81-705-01 1/8in radius
(3.18mm)
981 706 010 81-706-01 3/16in radius
(4.76mm)
981 707 010 81-707-01 1/4in radius
(6.35mm)

 

 

PARTING TOOLS
Description Code Part # Application Image
3/16in x 3 7/16in
HSS Parting Tool
(Sever tool)
(4.76mm x 87mm)
943 711 000 43-711-00
43-711-00P
Most materials up to 1in (25.4mm) wall
3/16in x 5in
HSS Parting Tool
(Sever tool)
(4.76mm x 127mm)
943 711 010 43-711-01
43-711-01P
Most materials up to 1in (25.4mm) wall
1/4in x 6in
HSS Parting Tool
(Sever tool)
(6.35mm x 152mm)
960 711 000 60-711-00
60-711-00P
Heavy wall parting, up to 2in (50.8mm) wall
4.3in Carbide Insert Holder Kit
(110mm)
For 3/16in (4.76mm) parting insert
960 716 000 60-716-00 Standard parting, most materials up to 1.5in (38.1mm) wall
3/16in Carbide Insert
(4.76mm)
960 717 000 60-717-00 For use with 60-716-00 Insert Holder
4.3in Carbide Insert Holder Kit
(110mm)
For 1/4in (6.35mm) parting insert
960 714 000 60-714-00 Standard parting, most materials up to 1.5in (38.1mm) wall
1/4in Carbide Insert
(6.35mm)
960 715 000 60-715-00 For use with Insert Holder 60-714-00
10.24in Carbide Insert Holder Kit
(260mm)
For 5/16in (8mm) parting insert
960 712 000 60-712-00 Heavy Wall Parting
5/16in Carbide Insert
(8mm)
960 713 000 60-713-00 For use with Insert Holder 60-712-00

Consult the factory for other applications or custom tooling.

Downloads

Tooling Sheet Manual