FFC Flange Facing Cantilever Module

FFC Flange Facing Cantilever Module

The FFC Flange Facing Cantilever module for DynaPrep MDSF extends the capability of the split frame allowing precision (FF) flat face and (RF) raised face flange facing operations such as bolt hole resurfacing, record grooving, and RTJ ring type joint groove form tooling and restoration. Able to work on the full range of DynaPrep MDSF line, the FFC Module allows a full reach into the flange surface on flanges 22in (564mm) in diameter and smaller, a 13.6in (345mm) reach into flanges up to 46.4in (1179mm), and a 13in reach on 45.6in-58.4in flanges (1158-1483mm).

Features:

  • Utilizes the DynaPrep MDSF as the machining platform
  • Radial feed rate in inches per revolution .003-.048in
  • Axial feed rate in inches per revolution .006-.048in, axial travel 2in
  • Integrated lifting handle
  • Ergonomic feed wheel

Performs:

  • Multilevel resurfacing
  • 500 RMS, 250 RMS, 125 RMS and 63 RMS record grove finishes
  • Smooth bolt-face refinishing surface

Options:

  • Auto axial feed
  • Remote trip actuation
FRAME SIZE MOUNTING DIAMETER MAX MOUNTING DIAMETER MIN ID (INSIDE DIAMETER) REACH
6-12in (152-305mm) 10.7in (272mm) 3.3in (84 mm) Full Reach
8-14in (203-356mm) 11.9in (302mm) 4.6in (117 mm) Full Reach
10-16in (254-406mm) 13.9in (353mm) 6.6in (168 mm) Full Reach
14-20in (356-508mm) 17.9in (455mm) 10.6in (269 mm) Full Reach
18-24in (457-610mm) 22.2in (564mm) 15.1in (384 mm) Full Reach
22-28in (559-711mm) 26.2in (665mm) 19.1in (485 mm) 13.6in (345mm)
26-32in (660-813mm) 30.2in (767mm) 23.1in (587 mm) 13.6in (345mm)
30-36in (762-914mm) 34.4in (874mm) 27.6in (701 mm) 13.6in (345mm)
36-42in (914-1067mm) 40.4in (1026mm) 33.6in (853 mm) 13.6in (345mm)
42-48in (1067-1219mm) 46.4in (1179mm) 39.6in (1006 mm) 13.6in (345mm)
48-54in (1219-1372mm) 52.4in (1331mm) 45.6in (1158 mm) 13in (330mm)
54-60in (1372-1524mm) 58.4in (1483mm) 51.6in (1311 mm) 13in (330mm)

 

Downloads

 

Specifications:

Product Part #:
69-3000-00

Rental Availability:
Yes