SDB Beveler & EP 424 End Prep Tooling

SDB Beveler & EP 424 End Prep Tooling

E.H. Wachs Genuine End Prep Tooling is the best choice to maintain the peak performance of our I.D. mounted end prep machine tools. All tooling on this chart is interchangeable among Wachs SDB 206, SDB 412 and EP 424 models. It’s designed to deliver precision bevels and counterbores, and consistent single pointing and flange facing results.

All Genuine Wachs Tooling is manufactured from premium tool steels with exclusive designs, tested to the highest standards in the industry. Listed below is commonly used tooling for typical end prep applications. If you have a tooling application not shown please contact the factory to speak with one of our technical sales representatives for assistance.

Beveling Tools
Description Part Number Application Image
Form Tool Insert Holder Kit
Low Range Holder ID 56-708-01
High Range Facing Insert Holder ID 56-708-02
37.5º Bevel Insert Holder 56-709-03
56-710-01 For completing facing and beveling of pipe with a 37.5º angle, both standard and J-prep; requires cutting tool sold separately
Form Tool Insert Holder – Includes holder, two insert screws & wrench.
30º 56-709-02 For beveling pipe; requires cutting tool insert sold separately
37.5º 56-709-03
Form Tool Cutting Tool – Insert for facing & beveling, double sided.
HSS 56-711-01 Most materials up to 32 RC hardness
Carbide 56-712-01 Materials harder than 32 RC
Form Tool Cutting Tool – Radius 3/32 “J” bevel insert, double sided.
HSS 56-711-02 Most materials up to 32 RC hardness
Carbide 56-712-02 Materials harder than 32 RC

 

Counterbore Tooling
Description Part Number Application Image
4:1 Taper Counterbore Tool
Minimum pipe ID size: Low Range 56-705-01 Most pipes
Maximum counterbore depth
1 1/8” (28.5mm)
Minimum pipe ID size: Medium Range 56-705-02
Minimum pipe ID size: High Range 56-705-03
Standard 3/8” x 3/8” (9.5mm x 9.5mm)
High speed tool bit.
Use with 56-424-00 and 56-424-01
56-713-00 Most pipes
10º ID Deburring Tool
Minimum pipe ID size: Low Range 56-702-01 10º ID taper, most pipes
Used for ID chamfering.
Minimum pipe ID size: Medium Range
56-702-02
Used for ID chamfering.
Minimum pipe ID size: High Range
56-702-03
4:1 Counterbore Tool Kit Maximum depth 3 1/8” (79.4mm)
Minimum ID 6” (152mm)
Standard tooling (EP 424 only)
Most pipes
Consists of tool insert holder 56-210-00
and 3 insert retaining screws.
Requires insert 60-700-04 sold separately
56-715-00
Counterbore Tooling Insert
For use with 56-715-00 Tool Kit 60-700-04

 

Single Point Tooling
Description Part Number Application Image
Single Point Holder
Low range single point tool holder
Requires tooling insert 52-701-01 sold separately.
56-424-00 Most materials less
than 32 RC hardness
Single Point Holder
High range single point tool holder
Requires tooling insert 52-701-01 sold separately.
56-424-01
Single Point Insert
Standard 3/8” x 3/8” (9.5mm x 9.5mm)
HSS Tool Bit for single point facing, beveling
Use with 56-424-00 and 56-424-01
52-701-01 Single point beveling
most materials less
than 32 RC hardness

 

Single Point Flange Facing Tools
Description Part Number Application Image
Flange Facing Tool Holder Kit
Kit includes a Low Range 56-714-03 and
High Range 56-714-02 insert tool holder,
two tool inserts, two insert retaining screws
and two screw wrenches.
56-418-01 Complete flange facing
Flange Facing Insert
Tool insert for single point flange facing.
Three-tipped insert for use with
56-418-01 Holder Kit
56-710-00 Flange facing and
record grooving

 

Downloads