E.H. Wachs Genuine End Prep Tooling is the best choice to maintain the peak performance of our I.D. mounted end prep machine tools. All tooling on this chart is interchangeable among Wachs SDB 206, SDB 412 and EP 424 models. It’s designed to deliver precision bevels and counterbores, and consistent single pointing and flange facing results.
All Genuine Wachs Tooling is manufactured from premium tool steels with exclusive designs, tested to the highest standards in the industry. Listed below is commonly used tooling for typical end prep applications. If you have a tooling application not shown please contact the factory to speak with one of our technical sales representatives for assistance.
| Beveling Tools | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| Form Tool Insert Holder Kit |  |
||
| Low Range Holder ID 56-708-01 High Range Facing Insert Holder ID 56-708-02 37.5º Bevel Insert Holder 56-709-03 |
56-710-01 | For completing facing and beveling of pipe with a 37.5º angle, both standard and J-prep; requires cutting tool sold separately | |
| Form Tool Insert Holder – Includes holder, two insert screws & wrench. |  |
||
| 30º | 56-709-02 | For beveling pipe; requires cutting tool insert sold separately | |
| 37.5º | 56-709-03 | ||
| Form Tool Cutting Tool – Insert for facing & beveling, double sided. |  |
||
| HSS | 56-711-01 | Most materials up to 32 RC hardness | |
| Carbide | 56-712-01 | Materials harder than 32 RC | |
| Form Tool Cutting Tool – Radius 3/32 “J” bevel insert, double sided. |  |
||
| HSS | 56-711-02 | Most materials up to 32 RC hardness | |
| Carbide | 56-712-02 | Materials harder than 32 RC | |
| Counterbore Tooling | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| 4:1 Taper Counterbore Tool |  |
||
| Minimum pipe ID size: Low Range | 56-705-01 | Most pipes Maximum counterbore depth 1 1/8” (28.5mm) |
|
| Minimum pipe ID size: Medium Range | 56-705-02 |  |
|
| Minimum pipe ID size: High Range | 56-705-03 |  |
|
| Standard 3/8” x 3/8” (9.5mm x 9.5mm) High speed tool bit. Use with 56-424-00 and 56-424-01 |
56-713-00 | Most pipes |  |
| 10º ID Deburring Tool |  |
||
| Minimum pipe ID size: Low Range | 56-702-01 | 10º ID taper, most pipes | |
| Used for ID chamfering. Minimum pipe ID size: Medium Range |
56-702-02 |  |
|
| Used for ID chamfering. Minimum pipe ID size: High Range |
56-702-03 |  |
|
| 4:1 Counterbore Tool Kit | Maximum depth 3 1/8” (79.4mm) Minimum ID 6” (152mm) Standard tooling (EP 424 only) Most pipes |
 |
|
| Consists of tool insert holder 56-210-00 and 3 insert retaining screws. Requires insert 60-700-04 sold separately |
56-715-00 | ||
| Counterbore Tooling Insert |  |
||
| For use with 56-715-00 Tool Kit | 60-700-04 | ||
| Single Point Tooling | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| Single Point Holder Low range single point tool holder Requires tooling insert 52-701-01 sold separately. |
56-424-00 | Most materials less than 32 RC hardness |
 |
| Single Point Holder High range single point tool holder Requires tooling insert 52-701-01 sold separately. |
56-424-01 |  |
|
| Single Point Insert Standard 3/8” x 3/8” (9.5mm x 9.5mm) HSS Tool Bit for single point facing, beveling Use with 56-424-00 and 56-424-01 |
52-701-01 | Single point beveling most materials less than 32 RC hardness |
 |
| Single Point Flange Facing Tools | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| Flange Facing Tool Holder Kit Kit includes a Low Range 56-714-03 and High Range 56-714-02 insert tool holder, two tool inserts, two insert retaining screws and two screw wrenches. |
56-418-01 | Complete flange facing |  |
| Flange Facing Insert Tool insert for single point flange facing. Three-tipped insert for use with 56-418-01 Holder Kit |
56-710-00 | Flange facing and record grooving |
 |
