Flange Facers

Wachs FF series flange facers are based on the powerful and versatile SDB series of bevelers. Easy to setup and operate by a single user, even an inexperienced one, the FF series feature a quick change mandrel system for fast installation. Rugged yet lightweight, their compact design allows them to fit into the tighest quarters.

Mounting to the pipe I.D. they’re self centering, and the mounting legs require less than a 1" (25.4mm) straight area for mounting. Wachs FF series flange facers produce a lathe quality record groove, RMS 500, 250, 125 & 63 surface on flat, raised or recessed face flanges in minutes. Specify the SDB Conversion Kit to add beveling, facing and counterboring capabilities.
 
Features:
  • Fast, easy setup, self centering design
  • Simple operation, lightweight and compact
  • Record groove, RMS 500, 250, 125 & 63
  • Reclaim scrap flanges and valves
  • Converts to SDB series with optional kit
Flange Facers

Flange Facers

EP 424 Speed Prep Hydraulic

EP 424 Speed Prep Hydraulic

EP 424 Speed Prep single points from 4" to 24" (DN100-600); hydraulic powered ID mount end prep machine tool. The EP 424...

View Product
EP 424 Speed Prep Pneumatic

EP 424 Speed Prep Pneumatic

EP 424 Speed Prep single points from 4" to 24" (DN100-600); pneumatic powered ID mount end prep machine tool. The EP 424...

View Product
FF 206 Pneumatic Kit

FF 206 Pneumatic Kit

FF 206 flange facing machine faces from 2" (50.8mm) ID to 6" 152.4mm) OD, up to a 2" 150# flange. Pnuematic powered model...

View Product
FF 313 Pneumatic Kit

FF 313 Pneumatic Kit

FF 313 flange facing machine faces from 3" (76.2mm) ID to 13" (330.2mm) OD up to a 6" 400# flange. Pneumatic powered...

View Product
FF 424 Hydraulic Kit

FF 424 Hydraulic Kit

Hydraulic powered FF 424 flange facing machine faces from 4" (101.6mm) ID to 24" (609.6mm) OD up to a 16" 150# flange. Fast,...

View Product
FF 424 Pneumatic Kit

FF 424 Pneumatic Kit

Air powered FF 424 flange facing machine faces from 4" (101.6mm) ID to 24" (609.6mm) OD up to a 16" 150# flange. Fast, simple...

View Product

Sales & Support

T: +1.847.537.8800
F: +1.847.520.1147
E: sales@ehwachs.com
Toll Free 1.800.323.8185

Rental Services

T: +1.847.537.8800
Toll Free 1.800.323.8185
Click here for more information

Download ITW Orbital Cutting & Welding Brochures
Download
Brochures

© E.H. Wachs®, All Rights Reserved. ITW Orbital Cutting & Welding includes Wachs and Orbitalum (formerly GF Georg Fisher RVT) manufacturers of orbital pipe cutting and welding equipment used in process piping and high purity applications. E.H. Wachs Industrial Products Division manufactures onsite pipe cutting, beveling, casing cutting, counterboring and flange facing weld prep equipment including cold cutting clamshell LCSF Low Clearance Split Frames, Guillotine® pipe saws (“Wachs Saw”), Trav-L-Cutter®, EP 424 and SDB end prep machine tools for precision weld preparation used in power generation, oil & gas and pipeline distribution. Other products include semi-custom machine tools, EICC External Internal Casing Cutter, handheld RS-2 non-rising stem portable valve operators and Pow-R-Drive P-2 valve turners. Orbitalum products include GF tube saws GF4, GF6 and GFX 3.0, BRB boiler tube bevelers and RPG tube facing and squaring machines. Orbitalum welding systems feature Orbitmat 165CA and 300CA power supplies, Orbiweld 38S and 76S enclosed and TP and OP open weld heads, Orbitwin switching units plus heat exchanger tube to tube sheet P16 and P20 welding heads. Products are sold, serviced and rented at our worldwide Sales and Rental Centers, call +1.847.537.8800 for additional information.